Rock Island Armory Tactical .45 ACP 1911

Discussion in 'Firearms' started by E.L., Jan 6, 2007.


  1. E.L.

    E.L. Moderator of Lead Moderator Emeritus Founding Member

    GB? What are they running?
     
  2. E.L.

    E.L. Moderator of Lead Moderator Emeritus Founding Member

    I found one at J&G, but they want almost $500 for it. I remember when they were about $350. I think for $500 the Taurus 1911 is a better buy.
     
  3. magnus392

    magnus392 Field Marshall Mags Moderator Emeritus Founding Member

    The RIA Tactical is running $430ish, the Taurus 1911's are running $500+ range.

    Now the GI copy RIA's where $299 when they came on the scene but have went up. At $369-399 I don't see why someone wouldn't get the Tactical upgrade.
     
  4. E.L.

    E.L. Moderator of Lead Moderator Emeritus Founding Member

    For me the extended beavertail is worth extra, and the better sights also. Just not sure how much better. The Taurus 1911's shoot very well, I like them but do not like their stock grips.
     
  5. magnus392

    magnus392 Field Marshall Mags Moderator Emeritus Founding Member

    Unfortunately I have not handled either pistol, but from what I could tell from the pics is that each had the extended beaver tail.
     
  6. E.L.

    E.L. Moderator of Lead Moderator Emeritus Founding Member

    No, just the Tactical model had the extended beavertail. The standard model is basically a GI model, with no beavertail and standard sights.
     
  7. magnus392

    magnus392 Field Marshall Mags Moderator Emeritus Founding Member

    Yeah, that is what I am saying:) $430 for the tacticool model with extended beaver for a lot less than the Taurus.
     
  8. handy1

    handy1 Monkey+

    I am a new owner of RIA 1911A1. I am wondering if I have a problem or not. I chambered a round, and then decocked the hammer. I can pull the hammer back manually but cannot move the slide to eject the chambered round. Is this a jam or the decocker safety's normal operation?
     
  9. kckndrgn

    kckndrgn Monkey+++ Moderator Emeritus Founding Member

    First off, congrats on the 1911, second off, WHY would you lower the hammer on a LIVE ROUND?

    To my knowledge 1911's do not have a "decocker", are you holding the hammer and pulling the trigger to "decock" your gun?

    If you can lower the hammer, then the safety is not engaged. If the safety is engaged and you can lower the hammer you have a defective gun.

    With the hammer in either position, safety off, the slide should come back.

    Got any pics of your problem?
     
  10. ghrit

    ghrit Bad company Administrator Founding Member

    I couldn't find a reference to a decocker either, must have let the hammer down by hand. You sure you aren't in the "half cock" notch? Very unsafe. Take the mag out, thumb the hammer back (pointed in a safe direction) push the safety DOWN then cycle the slide. If that doesn't work, set the safety (UP position) and go to a range and discharge it, or to a knowledgeable smith forthwith; there is a problem.

    Can you walk thru the steps you took by the numbers? We might get to the bottom of it that way.

    Edit to add: K-drag is right (never doubt him) something is amiss. Neither the slide nor the hammer moves if the safety is engaged. Safety off, hammer down, half cock or full cock, the slide will move. Something ain't right with the piece.
     
  11. BigO01

    BigO01 Monkey+++ Founding Member

    Here ya go E.L. http://www.centerfiresystems.com/1911.aspx



    1911 45 ACP Tactical Handgun Rock Island Part #AC-RI1911TAC

    Price: $419.99

    Of course you're gonna have shipping and whatever a local dealer hit you with for a transfer fee on top of that but it should all come to around say $450-475 if you can find a reasonable dealer .

    You can always look at Gunbrokers "For buyers" section and find and call any dealers you have in your area that work out of their homes .

    I did this a few years ago and found a dealer that only charges me $25 for a transfer fee for the first gun and it drops to $15 for any aditional guns I buy at the same time .
     
  12. kckndrgn

    kckndrgn Monkey+++ Moderator Emeritus Founding Member


    It was a lucky guess, or it was my 3 years training as a "gun store commando"[winkthumb]
     
  13. handy1

    handy1 Monkey+

    Thanks. The last suggestion worked. I slid the hammer back and was able to eject the round.
     
  14. handy1

    handy1 Monkey+

    In the RIA 1911A1 manual there is a listing of safety devices there is a thing called the disconnector safety. I was incorrect by calling a decocker safety. Anyway it did not make a difference once I tried pulling the hammer back and pushing the safety down. Thanks again
     
  15. Brokor

    Brokor Live Free or Cry Moderator Site Supporter+++ Founding Member

    Just paid $440 for mine and picked up a Blackhawk Serpa for her as well.

    Oh, I freaking LOVE that new gun smell! [dancindevil] Gotta take her out soon - warm weather where are YOU!!!???????
    Looked at a commander too for $490.
    DSCF1251.JPG
     
  16. E.L.

    E.L. Moderator of Lead Moderator Emeritus Founding Member

    I can't wait for the range report, you are going to like this .45. I know some Special Agents that carry in the Serpas they really like them.
     
  17. long hai

    long hai Monkey+

    I own a RIA Mil Spec and it out shoots my brother's expensive Kimber, or is it me!
     
  18. Seacowboys

    Seacowboys Senior Member Founding Member

    I use a Serpa for single-stack competition. I heated the release and bent it outward a bit to make it easier to index. It locks very positively and by altering the release, is really quick to draw.
     
  19. Pathfinder288

    Pathfinder288 Monkey+

    I'm wanting one. My local gun dealer can't keep them. I told him to hold me one, hopefully, it will be in soon. it's around $420.00 and the kings tax.
     
  20. fortunateson

    fortunateson I hate Illinois Nazis!

survivalmonkey SSL seal        survivalmonkey.com warrant canary
17282WuJHksJ9798f34razfKbPATqTq9E7