Fiocchi shotshell load data

Anyone have load data for Fiocchi shot shells? I can find domestic info but not for this hull. Got both high and low brass. I hate throwing out perfectly good stuff if I can reuse it! Thanks guys for any help.

 

According to trapshooters.com:
"There is data published by Alliant and Hodgdon for these hulls, if the basewad height is standard. A good place to look would be on their websites."

 

Pull out a set of calipers and measure the hight of the brass. I believe it's the same as the Winchester XX white box, which would make that data available. It may also be the same as the Kent target loads, but should have thicker base brass, which would cost you a slight amount of powder. Good luck, let us know what you find!

 

Thanks for the information. I should have plenty of time to look it up today. My GF wants to go shopping! .

 

Most guys I know load light for skeet and such, so it would be pretty easy to work up a few loads. I used to load up a pretty light .12 ga. Load for my over/under for upland game and they worked pretty well. In my 97 pump, I keep a case or two of light 8s for high speed trap at the local club, sure saves the shoulder in a 100 round shoot!!!

 

The length of the brass has nothing to do with reloading data