An interesting Idea....

Discussion in 'General Discussion' started by BTPost, Jan 27, 2013.


  1. BTPost

    BTPost Stumpy Old Fart,Deadman Walking, Snow Monkey Moderator

    I had a dream the other night about "Gun Control" and that Idiot David Gregory from CBS....

    Since ANY and ALL High Capacity Magazines are not Legal to Possess, in Washington DC, and ALL the DC Police are on the lookout for them, and would immediately ARREST, ANYONE who they saw walking around with one on the spot, What would happen if person decided to walk up the the Halls of Congress, wearing sweater that had four or five "Special" Magazines attached to it? Of course that Person would be ARRESTED, on the spot, and incarcerated, arraigned, and tried for VIOLATION OF the DC Possession Statute, RIGHT? ALL the while the defendant, does, and SAYS Absolutely NOTHING, PERIOD. Ok, now they get into Court, and think they have a SLAM DUNK, of a case, and the Prosecuter lays out ALL THE EVIDENCE, against the Perp, and his Defence lawyer, ask NO cross-examination Questions, at all. Then when the Defense gets it's turn, the lawyer stands up and asks the Judge for declatory Judgement for acquittal, on the grounds that the "OBJECT" in question, is NOT A Magazine, but instead, was just a hunk of MATERIAL. The prosecutor goes nuts, and can't object fast enough, and the Defense Lawyer, asks the judge & Prosecuter to prove that this IS A Magazine. The Prosecuter state, " Your Honor, of course it is a MAGAZINE, JUST LOOK AT IT." Then the Defense Lawyer asks, "Just what FIREARM does this OBJECT fit into?", and then asks for his SUMMARY JUDGEMENT, AGAIN.

    Ok, what nobody knows is this OBJECT was manufactured to a very exacting Specification, as it is .25 " to long, and .125 " to wide to fit into the MAGAZINE Well of ANY KNOWN weapon. It looks like a Magazine, but it fits NO KNOWN Weapon. At this point the Defendant thru his Lawyer, tells the Court, he is going to sue the Police, and Prosecuter for FALSE ARREST, FALSE PROSECUTION, and Violation of his CIVIL RIGHTS.....

    .......
     
    tulianr, Mountainman, kellory and 2 others like this.
  2. chelloveck

    chelloveck Diabolus Causidicus

    Oh shoot...that ain't no magazine...it's a piece of wearable installation art! (just that them ther bits a sheet metal is usually installed in a molle pouch : O )
     
  3. VisuTrac

    VisuTrac Ваша мать носит военные ботинки Site Supporter+++

    You know, I just maybe thick enough to try that.
    I got me some sheet metal. hmmmm
    Where is Frank Ticious?
    Need to know if he has some time available :)

    As I'm going to the east coast later this year
     
    chelloveck likes this.
  4. chelloveck

    chelloveck Diabolus Causidicus

    Always good to have a tough nosed hard assed bush lawyer on your side...with Frank's Mr Skunk also on the team, it would be an unbeatable combination!
     
  5. VisuTrac

    VisuTrac Ваша мать носит военные ботинки Site Supporter+++

    Yep, and i can convert some of this insane over time hours into Paid Time Off. Sooooooo I'll have some wiggle room in how long I can stay in DC.
     
  6. VisuTrac

    VisuTrac Ваша мать носит военные ботинки Site Supporter+++

    I'm afraid those metal shop, casting, welding, plastic and alloy machining experience I've aquired over the years MAY just come in hand.

    Anyone got some open time on a knee mill, I'm thinking about making a nice follower (gotta make it look good). I can handle the rest of it with a pair of tin snips, a vice, and a welder. Oh yeah, and a hammer.
     
  7. ghrit

    ghrit Bad company Administrator Founding Member

    And a radiused brake.
     
  8. VisuTrac

    VisuTrac Ваша мать носит военные ботинки Site Supporter+++

    that's what the hammer is for .. that plus some drill rod and a piece of hardwood with a trough in it ;)

    Don't need no stinkin sheet metal brake. I'll be able to afford it later.
    bwhahahahahahhahaahahahahahahahahahahahahahhahahahahahahahahahahahahahaha
    ahahahahahahahahahahhahahahaahahahahahahahaha
     
  9. VisuTrac

    VisuTrac Ваша мать носит военные ботинки Site Supporter+++

    Wow, Imma gonna need some thinner sheet metal. 14ga is a bitch to cut.
     
  10. Seacowboys

    Seacowboys Senior Member Founding Member

    find you a sheet-metal fabrication shop and have them shear and break your pieces, I'll bet if you talk with one of the mechanics there and tell him what you want to do, he'll cut it and break it for free. I would (have a break but don't have access to a shear anyy more).
     
  11. VisuTrac

    VisuTrac Ваша мать носит военные ботинки Site Supporter+++

    Oh hell, I just put a sheet metal brake, arbor press and a compound vice into my wishlist at Amazon. Sheet metal already arrived and drat, there is a spring Mfg right next door to my office.
     
    kellory likes this.
  12. kellory

    kellory An unemployed Jester, is nobody's fool. Banned

    That's terrible.;)
     
  13. VisuTrac

    VisuTrac Ваша мать носит военные ботинки Site Supporter+++

    Yeah that's exactly what I was thinking. It's like the stars are aligning or sumtin'
     
survivalmonkey SSL seal        survivalmonkey.com warrant canary
17282WuJHksJ9798f34razfKbPATqTq9E7