600v 3 phase generac

Discussion in 'Off Grid Living' started by Rsparks, Mar 19, 2018.


Tags:
  1. Rsparks

    Rsparks Monkey

    Well it wasn't easy, but it's on the ground. I'll open the covers and get a much data as possible by the weekend.

    20180322_192841.
     
    Tully Mars likes this.
  2. ghrit

    ghrit Bad company Administrator Founding Member

    I can see right away that you'll be modifying that stack sooner than later.
     
    Rsparks likes this.
  3. Rsparks

    Rsparks Monkey

    Picked up some free steel as well. There was a lot more, but it was sketchy trying to load it by myself without a lifting device.

    20180323_190844.
     
    Tully Mars likes this.
  4. Rsparks

    Rsparks Monkey

    Anyone live in southwest Michigan?
     
    Cruisin Sloth likes this.
  5. Rsparks

    Rsparks Monkey

    Any of these helpful?

    20180328_185158.

    20180328_185207.

    20180328_185600.

    20180328_185615.
     
  6. Rsparks

    Rsparks Monkey

    Posted pictures
     
  7. Rsparks

    Rsparks Monkey

    Picked up a trailer for it.

    20180331_000411.
     
    Tully Mars likes this.
  8. Rsparks

    Rsparks Monkey

    Loaded up

    20180331_195440.

    20180331_202712.
     
    techsar and Tully Mars like this.
  9. Rsparks

    Rsparks Monkey

    I was wrong about the hours...
     
  10. Rsparks

    Rsparks Monkey

    20181105_182808.

    20181105_182808.
     
    techsar likes this.
  11. techsar

    techsar Monkey+++

    I take it you got the output reconfigured?
     
  12. Rsparks

    Rsparks Monkey

    I have yet to verify the current configuration. I was out of state for work since spring so I haven't had time to mess with it. All of the control circuits are wired to the 240v terminal blocks (i/o) and all of the 600v are left blank. Also the alarm settings seem to be setup as though it is tapped for 240v.
     
    oldman11 likes this.
  13. techsar

    techsar Monkey+++

    Well, I hope you get it right...too nice a unit to let the magic smoke out ;)
     
    oldman11 and Cruisin Sloth like this.
  14. Rsparks

    Rsparks Monkey

  15. Rsparks

    Rsparks Monkey

    Does anyone know where the dip switch for natural gas/propane would be located? Having issues locating it.
     
    Gator 45/70 likes this.
  16. Gator 45/70

    Gator 45/70 Monkey+++

    What is another name for it, Dip switch I havn't heard the expression before?
     
  17. Rsparks

    Rsparks Monkey

    They are small two position switches normally affixed to a circuit board
     
  18. Gator 45/70

    Gator 45/70 Monkey+++

    Ah, Droop switches,If that is correct? I've seen these built into the voltage regulator control.
     
  19. Rsparks

    Rsparks Monkey

    I found a bank of four on the governor, I'm just not sure which one. I cant locate an exact manual for this unit and would rather not damage it unintentionally. I called generac, and they don't have any record of it being built...
     
    Last edited: Nov 7, 2018
  20. Gator 45/70

    Gator 45/70 Monkey+++

    Is it marked Gain by chance?
     
  1. techsar
  2. Benjamin A. Wood
  3. Asia-Off-Grid
  4. Asia-Off-Grid
  5. Asia-Off-Grid
  6. Asia-Off-Grid
  7. Asia-Off-Grid
  8. Asia-Off-Grid
  9. Asia-Off-Grid
    Resource

    Generator FAQ 2001

    Generator FAQ, By Steve Dunlop. [img]
    Posted By: Asia-Off-Grid, Jul 19, 2018 in category: Energy
  10. Asia-Off-Grid
  11. BenP
  12. BenP
  13. Thunder5Ranch
  14. T. Riley
  15. Adam_L
  16. T. Riley
  17. Asia-Off-Grid
  18. Asia-Off-Grid
  19. Thunder5Ranch
  20. oil pan 4
survivalmonkey SSL seal        survivalmonkey.com warrant canary
17282WuJHksJ9798f34razfKbPATqTq9E7