For Sale The 15-Minute Shotgun by Uncle Morgan is Now on Sale

Discussion in 'Firearms and Related' started by UncleMorgan, Aug 29, 2016.

  1. UncleMorgan

    UncleMorgan I like peeling bananas and (occasionally) people.

    The 15-Minute Shotgun by Uncle Morgan is a complete and fully-illustrated 16-page instructional booklet that will show you exactly how to make a legal 12-ga. slamfire shotgun for less than $7.00 and in less than 15 minutes.

    Without hurrying.

    The 15-Minute Shotgun includes a complete Bill of Materials with prices and sources for everything you need, plus a list of the few simple hand tools required.

    There's no need for welding. There's no milling and no lathe-work, It's tool-bag technology.

    The 15-Minute Shotgun also includes the facts about legal shotgun length, and shows how you can legally make and sell slamfire shotguns at a very tidy profit--without needing a Federal manufacturing license.

    There is a lot of material on the Internet about the construction of slamfire shotguns, but there are also a lot of things in The 15-Minute Shotgun that are not on the Internet.

    Safety and Strength of Materials are considered in detail.

    The 15-Minute Shotgun contains my most valuable contribution to slamfire technology--a simple little trick that EVERYONE that has or makes a slamfire shotgun should know about.

    The 15-Minute Shotgun is now available in .pdf for $3.00 via PayPal.

    It's also available in print for $5.00, payable by Postal Money Order. Postage is included.
    Last edited: Aug 29, 2016
    Ganado and Motomom34 like this.
  2. Motomom34

    Motomom34 Monkey+++

    Is this something a novice, non-mechanical person could do?
    UncleMorgan likes this.
  3. ghrit

    ghrit Bad company Administrator Founding Member

    Yes. If you can tell which way to turn a spigot and use a wrench, you are in business.
    chelloveck, Motomom34 and UncleMorgan like this.
  4. UncleMorgan

    UncleMorgan I like peeling bananas and (occasionally) people.

    Absolutely--but you don't need any wrenches. It's more like if you can put a lid on a Mason jar, you're good to go.

    All you need is a jigsaw, a file, a screw gun, a pencil, and a yardstick.

    There are only a few straight wood cuts to make the gun stock and one metal cut to make the barrel.

    The pencil and yardstick are actually optional, because you could eyeball the cuts and make them without any measuring. The yardstick is mostly for convenience and to make sure you don't cut anything illegally short.

    All the parts just fit together righteously easy.

    I didn't mention it in the booklet, but it's written with women in mind. I get really hot everytime I read about a woman who was being stalked and wound up dead because she couldn't buy a defensive handgun without a long waiting period.

    Or just didn't have the cash.


    With the booklet, she can make herself a 12 ga. shotgun on the spot. Cheaper than buying, and faster than waiting.

    The 15-Minute part is a bit of a fib, though. The last one I built took 6 minutes and 20 seconds, without hurrying. Plus a little curing time for that one little dab of epoxy.
    Last edited: Aug 29, 2016
    Ganado, tacmotusn, Motomom34 and 3 others like this.
  5. Motomom34

    Motomom34 Monkey+++

    And that is why all the women adore you! [grouphug] I am sure @Ganado will be along soon to hug you also.
    UncleMorgan and Ganado like this.
  6. tacmotusn

    tacmotusn RIP 1/13/21

    @UncleMorgan Okay, I will bite for a hard copy at $5 with SH included. PM me where to send the postal money order.
    UncleMorgan likes this.
  7. UncleMorgan

    UncleMorgan I like peeling bananas and (occasionally) people.

    Thanks, tac.
    I just tried to PM you 2x and got a full inbox error each time.
    Send to me and I'll reply toot-sweet.
    Last edited: Aug 29, 2016
    Motomom34 likes this.
  8. Ganado

    Ganado Monkey+++

    Motomom34 and UncleMorgan like this.
  9. UncleMorgan

    UncleMorgan I like peeling bananas and (occasionally) people.

    Thanks, Ganado. Yer sweet. You and moto are cherished friends, for all we've never met.

    (Yah! Hi, moto. You too!)
    Motomom34 and Ganado like this.
  10. tacmotusn

    tacmotusn RIP 1/13/21

    @UncleMorgan I have cleared some space in my PM inbox. Hope to hear from you soon. Thanks
  11. SB21

    SB21 Monkey+++

    I will take a hard copy as well . Send me the address also and I'll get a M.O. in the mail .
    Motomom34 likes this.
  12. secondrecon

    secondrecon Monkey+++

    Me too please.
  13. UncleMorgan

    UncleMorgan I like peeling bananas and (occasionally) people.

    All replies up to date as of now. Enjoy, y'all!
  14. Pax Mentis

    Pax Mentis Philosopher King |RIP 11-4-2017

    I need the email for PayPal since I prefer not to get a MO...and don't much care whether it's paper or .pdf
  15. hot diggity

    hot diggity Monkey+++ Site Supporter+++

    I'd like to order a hard copy as well.
  16. oil pan 4

    oil pan 4 Monkey+++

    The weakest shot gun shells generate 5,000psi of pressure minimum.

    You should call it the 12 gauge (or whatever it fires) liberator. Now every piece of shot gun ammunition anywhere can be a weapon.
  17. ghrit

    ghrit Bad company Administrator Founding Member

    And the heavier loads approach 18K if not more. Pick your pipe carefully.
  18. UncleMorgan

    UncleMorgan I like peeling bananas and (occasionally) people.

    The Society of Arms and Ammunition Manufacturers, Inc (SAAMI) specifies that 12 GA shotgun shells of 3" length or less can generate a maximum chamber pressure of up to 11,500 psi, and 3-1/2" Magnum shells can generate maximum chamber pressures of up to 14,000 psi. Schedule 40 Black Iron Pipe is rated for a bursting strength of at least 8,200 psi. The two layers of Sch. 40 pipe at the breech of the 15-Minute Shotgun have a combined bursting strength in excess of 16,400 psi. So The 15-minute shotgun is made from material of adequate strength for both kinds of shells. 3-1/2 Magnum loads have been successfully fired in black iron pipe slamfire shotguns. However, to preserve the greatest margin of safety, the 15-Minute Shotgun is not "rated" for 3-12" Magnum loads, and only shells up to and including 3" in length are recommended for use.

    I know of no 12-Ga. shotgun shell offered for sale anywhere in the world that generates a chamber pressure in excess of 14,000 psi., much less 18,000.

    Material Strength is discussed in detail in the booklet, along with other safety information.

    Anyone who reads my booklet will see that I take safety issues very seriously. And I do my homework.

    @Pax Mentis: I did not simply tell you I had a hard day, and offer that as the reason you have not received your order. I corrected the error I made when I sent you my email address and attributed that to the fact that I had a hard day. That email was sent to you before I became aware I would run late in shipping your order. So lateness was not discussed.

    If you are worried about your money, I will refund it immediately. Just let me know by PM or email.

    You--and everyone else who had placed an order with me--has not received their booklet because I was delayed in the final printing. Part of that was because I built another shotgun, following the Instructions step-by-step to proof the construction sequence completely before I sent the booklet out.

    Then I had to travel almost 1,000 miles before I could test fire it. I'm writing now from Illinois, instead of my home in Florida. I completed half the testing today, and have made arrangements to complete the other half tomorrow.

    In the meantime, I am making a few small changes in the booklet (updates) and expect to have it printed out late tomorrow afternoon. I'm also amending some illustrations because of clarity issues that didn't show up until the booklet was printed and proofed.

    All who wish to wait for me to complete the testing, printing, and mailing, can be assured that this booklet is offered with a 100% satisfaction guarantee. If anyone is not happy with their purchase, they can have their money back.

    On the subject of money, I have recently learned that the US Post Office charges about $1.29 for a $5.00 Money Order. Their prices have risen quite a bit since I last handled a PMO. Well beyond reason. So send me any kind of Money Order you may find convenient, or have a friend do the PayPal thing for you to maintain OpSec.

    I appreciate the patience of all who wish to maintain their orders in effect, I also understand the concerns of those who may wish not to, and will refund those persons immediately upon request.

    I have not yet, BTW, checked either my mail or my PayPal account to see what monies I may have received. Frankly, I've been handling things more important than the money.

    I will update this thread again tomorrow afternoon, or in the late evening.
    3M-TA3, Ganado and Yard Dart like this.
  19. UncleMorgan

    UncleMorgan I like peeling bananas and (occasionally) people.

    Hi, hot--will print one up for you also. PM sent.
  20. oil pan 4

    oil pan 4 Monkey+++

    The problem with iron pipe is when it bursts its going to frag.
survivalmonkey SSL seal warrant canary