1. Sorry, we're currently trying to recover from a system failure.
    Hopefully this is resolved soon -melbo
  2. New registrants, please note. There may be some delays as we work out some glitches associated with recovering from the outage. If your approval doesn't come thru in a week, please re-try.

Trace inverter System 8000 Watts @24Vdc

Discussion in 'Buy Sell Trade' started by Cruisin Sloth, Apr 28, 2019.


  1. Cruisin Sloth

    Cruisin Sloth Special & Slow

    Here is the Creators unit , reworked after extraction .
    I replaced with a outback radion system that he designed .
    Then im now getting ready to install a B17 system and remove the Outback .
    So this is for sale . Makes 8000 watts 125/250Vac single phase split leg .

    So if wired correctly , You could run one as Master for 125Vac (110-125Vac adjust , as needed , but higher Vac is less amps on starts )
    make slave (second inverter , only come alive on 220- 250 Vac draw . the slave will search for draw and use 35-40 watts/24 hrs in search mode for 24 volts DC system , 20-26 watts for 48Vdc system. Different coils .

    I was brought up to speed last week from the Gents ..

    On a pallet sealed ready to ship.
    Sloth

    Trace Engineering (Xantrex) SW4024 4000W Inverter & Battery Charger, Unused NIOB | eBay

    Make a decent offer .
    It's in Canada now .

    1.

    2.

    3.

    4.

    5.

    6.

    packed up 2 ship.
     
    Tully Mars, techsar and Thunder5Ranch like this.
  2. BTPost

    BTPost Stumpy Old Fart Snow Monkey Moderator

    I would be interested, if I hadn’t just scored a Trace SW5548, that is sitting out on the front porch...
     
  3. techsar

    techsar Monkey+++

    Nice! Very similar to the unit I picked up a couple of years back and has been running perfectly since installation.

    Someone is going to get a heck of a deal!!! (y) :5s:
     
  4. Thunder5Ranch

    Thunder5Ranch Monkey+++

    One Week Earlier and I would have been all over this :( My Outback radian units are scheduled for delivery in the morning :( Still would be but only so many coins in the piggy bank atm :)
     
  5. Cruisin Sloth

    Cruisin Sloth Special & Slow

    BT you have set at 48Vdc , so this is NOT for you to add on , BUT to make a different system voltage ..

    The higher voltage is the best harvest !!!
    Sloth
     
  6. BTPost

    BTPost Stumpy Old Fart Snow Monkey Moderator

    No Sloth, this is going to the NEW Place which does not have a System yet... I also have a SW4048 that I have keeped around as a backup, for my SW4024 System here at the Old Place... I think I will put both the SW5548 & the SW4048 into the New Place, both running off the same Battery Bank, and the SW4048 setup in a Hot Standby configuration...
     
  7. Cruisin Sloth

    Cruisin Sloth Special & Slow

    That will work out very well . No limits on 220 stuff.
    Sloth
     
  8. BTPost

    BTPost Stumpy Old Fart Snow Monkey Moderator

    At the New Place we do NOT have any 240Vac Loads, so that really isn't an issue, up there... Down here, I do have 240Vac Loads, so I generate my Power at 240Vac and have a 10Kw Transformer that drops that down to 120Vac for the SW4024 which feeds all the 24/7 Inverted Loads... The 240Vac Loads only need to be Powered if the Gensets are running....
     
survivalmonkey SSL seal        survivalmonkey.com warrant canary
17282WuJHksJ9798f34razfKbPATqTq9E7